* gnu/tests/foreign.scm (qcow-image-with-marionette):
- Create .autorelabel file to make copied Guile work
on SELinux-enabled systems.
(resize-lvm-xfs-partition): New variable.
(run-foreign-install-test): Increase RAM for VM to 1024
as 512 is not sufficient to run Guix installation
on Fedora.
(fedora-qcow2): New variable.
(%test-fedora-install): New variable.
Change-Id: Ib247a174dfea8630d830763410391077516a8c16
Merges: #5007
This one is a bit more complicated than the other ones, because the qcow2
image is too small to hold the tarball contents. So I have decided to add in
logic to resize the qemu img, the partition and the filesystem.
* gnu/tests/foreign.scm
(ubuntu-qcow2): New variable.
(ubuntu-uidmap-deb-file): New variable.
(ubuntu-libsuid4-deb-file): New variable.
(%test-ubuntu-install): New variable.
Change-Id: Ib705cfe0aeab5e6ede284b8eff06483aea617349e
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Merges: #4997
Change-Id: I17472d160665fa4965d1c1ee00d671746bd5fb74
* gnu/tests/foreign.scm
(qcow-image-with-marionette): Add resize-image and
resize-proc to resize the image, the partition and the file system.
(resize-ext4-partition): New variable.
(run-foreign-install-test): Add resize-image and resize-proc; Pass them to
qcow-image-with-marionette.
Change-Id: I92dbe0cdcafb5ff0a0b6c3e9b96205b4ad9d10e8
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
This is a followup to d5cf3b5def.
* doc/guix.texi (Upgrading Guix): Use markup for commands.
Change-Id: I0b751ddc7f0e8e57813be23c809c23ade1e6cbd1
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Merges: #5724
* doc/guix.texi (Binary Installation): Link to the script upfront rather than
in a footnote.
Change-Id: Icd89d0e9bb0c701b6b956ce214015e5466299bf3
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
* doc/guix.texi (Binary Installation): Move paragraphs about ‘guix’ packages
of other distros to the bottom.
Change-Id: Ie7c3484e40fb0dbe502e81f17e2d74b7afa0e777
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
This reverts 0f9fe721be.
The rationale is that there’s no reason to single out Parabola and, more
importantly, it obscures the message of this section.
* doc/guix.texi (Binary Installation): Remove Parabola instructions.
Change-Id: Ib7b2b0629d8e3a90cd09705cc2dcde15df8f51a2
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
* gnu/services/desktop.scm
(desktop-services-for-system): Use gdm on all 64-bit systems.
* gnu/services/xorg.scm (set-xorg-configuration): Adapt to
desktop-services-for-system change.
* gnu/system/examples/desktop.tmpl: Determine the support of Gnome by checking
for supported package.
Fixes: #5388
Change-Id: I0d512a7c31188cea0335e66f00a6d65ae59d09a4
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
This distinguishes them from manually added ones. When committing changes,
these ‘TODO REVIEW’ comments should be addressed and removed first.
If you're working with Rust packaging, please update your local Guix to this
commit to apply the change.
* guix/import/crate.scm (cargo-lock->expressions): Generate comments with
‘TODO REVIEW:’ prefix.
* tests/import/crate.scm ("crate-lockfile-import"): Don't check the exact
comment string.
* doc/guix-cookbook.texi (Common Workflow for Rust Packaging),
* gnu/packages/rust-crates.scm: Adjust accordingly.
Change-Id: I76b914b49be46d04cc61b101b6bc9e31cadb7f07
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Merges: #4567
On some AArch64 devices, like RPi5 or honeycombs used by CI, the test fails.
* gnu/packages/patches/qemu-disable-aarch64-migration-test.patch: New file.
* gnu/packages/virtualization.scm (qemu): Patch it.
* gnu/local.mk (dist_patch_DATA): Register it.
Change-Id: Ica2d31bc53e154637036c13517289c6c78010739
Fixes: #2447
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Merges: #5683
The list box is automatically sorted, putting Hurd in front of Linux Libre.
* gnu/installer/newt/kernel.scm (run-kernel-page): Do not sort.
Change-Id: Id534560e93eee597e1180d766abb7422cd8e547a
One of them also fails on bordeaux for x86_64.
* gnu/packages/kde-plasma.scm (kwin)[arguments]<#:test-exclude>: Disable
failing aarch64 tests on all architectures.
Change-Id: Ib32f927d0165213f358d6962f27604109cd4be3b
The state is not great, there are many unsupported devices in the current
state. This adds support for much more USB controllers than before and also
SD cards.
* gnu/system/install.scm (%installation-initrd-modules): Add a lot of new
modules to support booting on various devices
Change-Id: I523ebe992a7e3740708622899d1209f20eb23e63
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Merges: #5320
* gnu/bootloader/u-boot.scm (make-u-boot-installer): Use the original file
name without the Guix store file prefix when installing a plain file.
Change-Id: Ica2707878c1dd5f7d3b805499a0a38ca76e315af
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
* gnu/bootloader/u-boot.scm (install-starfive-visionfive2-uEnv.txt): Remove
an extra "~%" from the file contents.
Change-Id: Ie83ae01702538153017e45da51ce2c3000df7899
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
The default timezone is set to Europe/Zaghreb, however the new check
introduced in 0a9eb3f3e2 was checking for the
one in the operating-system definition, which is Europe/Paris.
* gnu/tests/install.scm (gui-test-program): Explicitely set timezone to
Europe/Paris.
Change-Id: I7b5d327f13760632c9fbc0c1223a6a9bbc624f4d
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Merges: #4977
* doc/contributing.texi (Building from Git): Improve instructions.
Include 'cd' and authorizing the directory for guix shell.
Change-Id: Ied8eb7553ab92504a87c0059820ca154a18c33ab
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
To prevent confusion, remove possibility to choose the desktop services on
both Hurd and 32-bit x86. As the info text suggests, desktop environments are not
available on Hurd. As for x86, there some of the services do not build. While
it is more idiomatic to fix those services, for the 1.5.0 release, use this
workaround to disable the desktop page. This ensures users aren't left
building something that will fail.
* gnu/installer/newt/services.scm
(run-desktop-environments-cbt-page): No longer show special info on Hurd.
(run-desktop-environments-cbt-page/maybe): Call
run-desktop-environments-cbt-page on architectures that support desktop
environments well.
(run-services-page): Call maybe variant of run-desktop-environments-cbt-page.
Change-Id: I4bb636e4d5bf2b73bfaf276fd359c77402c5c5f7
Fixes: #5400
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Merges: #5503
Since Hurd always uses Legacy BIOS bootloader, do not offer GPT label.
* gnu/installer/newt/partition.scm (run-label-page): Force MSDOS for Hurd
target.
Change-Id: Ib8bb1175f85e8f6084683a747303e3e19f20be42
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
To allow users in headless consoles to use the graphical installer, add an
executable. This executable is referred to by the console motd, so users
in headless setups will get to know about it.
* gnu/system/install.scm
(installer-command-package): New variable.
(%installation-services): Use it, add it to the profile-service-type
Change-Id: Id2d07b3f190aa17c99c7667c3bb31ae696499dde
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Merges: #5346
motd is shown by the pam module, it doesn't support changing what motd gets
displayed easily. The only way to control it is by read permissions on
individual motd files, making files unreadable by the user logging in.
So instead of that, make a custom script that prints different motd,
checking if a temporary file exists. An environment variable would be better
suited for this purpose, but those aren't passed through by PAM.
* gnu/system/install.scm
(%installation-login-pam-service): New variable. Modified login pam service.
(%installation-console-login): New variable. Wrapper around login to create a
file for PAM rule.
(%installation-services): Use new login pam service and wrapper.
Change-Id: I5e05e604b3106390181190559ade62ca5e2db216
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
This adds the possibility to parse /proc/consoles to find a primary console.
Then, on AArch64 this is used in the installation image. On AArch64, the boot
usually happens with chosen device tree that contains the serial console.
On x86_64, this does not happen so often, so we keep the installation iso
minimal there.
The primary console is chosen, but there is a fallback to any non-virtual one.
Virtual console (/dev/tty0) is skipped, because that one can point to any
console, like /dev/tty1 and so on. So it's not safe to register agetty on it.
* gnu/build/linux-boot.scm (read-linux-consoles): New variable.
* gnu/services/base.scm (default-serial-console): Use primary console as
fallback.
* gnu/system/install.scm (%installation-services): Add agetty tty for
consoles.
Change-Id: Iae01f7bc85b5ffdef2e52b1d0710889915b0f54a
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
This is to accomodate following situation:
- The proxy is up
- The substitute server is down
When that happens, 5xx is returned from the proxy, typically either Bad
Gateway or Gateway Timeout. This implies the substitute server is down.
Still, for checking if the user is online, we do not check the response code.
If there is a response, even 4xx, 5xx, it still means the user is online.
* gnu/installer/newt/network.scm
(url-alive?): Add optional argument to to check the response code.
(common-urls-alive?): Add the same argument, passing it to url-alive?
(check-substitute-availability): Assume offline when non-successful http code
returned.
Follow up of 9ea2174ba8.
Change-Id: I52ae8a49407009dd76ad5da3925355770bc25d0c
Change-Id: I99a77cb7332198bae84f28a00a6cc0409d5bf3b9
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Merges: #5217
