* etc/teams.scm (mate): New team.
("FuncProgLinux"): New team member.
* etc/teams/mate/mate-manifest.scm: New file.
* CODEOWNERS: Regenerate file.
Change-Id: I3db2c4138f92f9ff21bdb7a302f9af67d7c9e710
Signed-off-by: Andreas Enge <andreas@enge.fr>
As can be seen in the Xcursor docs, the default path is
`~/.local/share/icons, ~/.icons, /usr/share/icons, /usr/share/pixmaps`,
zzz-guix.sh is currently missing the first two.
* etc/guix-install.sh (sys_create_init_profile): Add home paths to XCURSOR_PATH.
Change-Id: I4284d7648394c06b83e4eba91882b81c8a35d706
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Merges: #5231
This is a rewrite of the bash commands for generation of guix binary
tarballs and system images to Guile. I am expecting this will help us
significantly with getting the same derivations locally and from Cuirass,
instead of relying on images/tarball job specifications and trying to tweak
it locally to have the same ones.
Implements: #4347, #4348.
* etc/teams/release/artifacts-manifest.scm: Make a manifest with
release artifacts for all supported systems.
* etc/teams/release/artifacts.scm: Collect artifacts for
all supported systems into a union with proper names for
the release artifacts.
* Makefile.am (release): Use time-machine instead of pre-inst-env; Switch to
building new artifacts.scm
Change-Id: I71a6a27e6f315dd31b91c49e71dff2d09695c0dc
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
The xorg modules are used inside of services that's thunked. So we can
make them depend on the %current-system.
* gnu/services/xorg.scm
(default-xorg-modules): New variable.
(%default-xorg-modules): Return result of (default-xorg-modules).
Change-Id: I10f722e52d598ce3e83ef3f200b3bd953bc08e17
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Channels from the load path will shadow channels used through time-machine or
used through any other guix than the one in ~/.config/guix/current. This is
true for all channels that are in ~/.config/guix/current except guix. On Guix
System, /run/current-system/profile/share/guile/site/3.0 is usually in
GUILE_LOAD_PATH that typically has only Guix, so no shadowing happens in most
cases.
For using Geiser and other sw, it's possible to configure them to use "guix
repl" that's intended for this use case. This is then makes the guix being
used explicit.
It is expected that this is only a temporary solution. After a proper
solutions is found, it will be reverted.
Workaround #4819.
Reverts: 78390634d7.
Change-Id: I36b921a758618f382af9097003415f902b27c44b
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Currently the service cannot be restarted, because the gnu store mount makes
it read-only. So fix this by removing the mount when starting the service.
"-" to accept failures, in case the command doesn't finish successfully,
chances are, the store can be mounted as RW, so continue.
"+" to run as root
Fixes: #4744
* etc/guix-daemon.service.in
(Service)<ExecStartPre>: Stop gnu-store.mount
(Service)<ExecStartPost>: Start gnu-store.mount
Change-Id: I296f5d8805497f8a7364b68d627eb6d4fc05dbff
This allows better integration of packages installed by Guix with the
foreign distro. E.g.:
1. .desktop files from applications installed by Guix can be found by
the user's desktop environment.
2. Fonts installed in ~/.guix-profile/share/fonts can be found by GUI
applications without having to install the fontconfig package, as the
the "Application Setup" section of the manual recommends.
* etc/guix-install.sh (sys_create_init_profile): Add $GUIX_PROFILE/share
to XDG_DATA_DIRS.
Change-Id: Iba74b0782ffbad64d64cc1c5889b04012963a3e0
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
* etc/guix-install.sh (main_install): Call chk_gpg_keyring only if
GUIX_BINARY_FILE_NAME is not set.
Change-Id: Ia0a7449c8798ca7d61a0f1f1e793f2bafd521c5b
Signed-off-by: npatra <nilesh@riseup.net>
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Instead of fetching from no longer responsive gnu.org, fetch from
Codeberg.org, falling back to public keyservers in case codeberg
is down or unresponsive.
* etc/guix-install.sh
(GPG_SIGNING_KEY): Change gnu.org user ids to codeberg usernames.
(PUBLIC_KEYSERVERS): Add variable.
(chk_gpg_keyring): Use codeberg for fetching gpgs and fallback to public
keyservers.
Change-Id: Iddcd31239e2f3460d920194d62443ff00be7c957
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
There may be an improvement to be made to guix-daemon to avoid some
spurious denial audit messages, as described in the FIXME.
* etc/guix-daemon.cil.in: Add missing rules for guix gc.
Change-Id: I3651c4523528649048c7135fabd3000c8e78b1ff
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
With the changes in this commit, I can use "guix pull" and
"guix install <package>" successfully and without generating SELinux
denial erros in the system log.
* etc/guix-daemon.cil.in: Add missing rules for guix pull/guix install.
Change-Id: I40b5ed2c458b275804bc073fb72286947ecb0283
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
For now, the packages are from the online form sent in
<https://lists.gnu.org/archive/html/guix-devel/2025-10/msg00091.html>.
Going forwards, more packages can be added manually or if there are more
answers to the form.
* etc/manifests/release-user-packages.scm: New file.
* Makefile.am: Add it.
Change-Id: I2d619ab9d307a6ea216310d1c86a1dc71feb1523
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Signed-off-by: Andreas Enge <andreas@enge.fr>
* etc/news.scm: Reuse 6.13 translation for linux-libre 6.16 removal entry,
because it is mostly the same.
Change-Id: Ib6ab35ed56534a133926950ed7a71972548070f4
* etc/committer.scm.in (change-commit-message): Fix handling when package
inputs are the same but in different order.
Change-Id: I8760a7c8fb57c82d657b239a50c973ba81f9781f
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Takes an operating-system and generates a manifest out of the
packages that can be found in the records.
This script is not finished completely, it still requires manual
work after generation of the manifest. And it will not generate
a complete manifest! This is because the scripts contain additional
dependencies that aren't captured anywhere lower in the operating-system
record.
* etc/teams/release/os-manifest-generator.scm: Add script.
Change-Id: Ib9a5683a60e7fef1ce049b1c6c5ec4fc77ce6c58
Signed-off-by: Efraim Flashner <efraim@flashner.co.il>
As stated in the manifest, use two release manifests:
1. Minimal one
2. Full one with all the desktop services enabled.
* etc/manifests/release.scm: Move to etc/manifests/release-minimal.scm.
* etc/manifests/release-minimal.scm (%system-packages):
Add packages from default privileged-programs.
Add %base-firmware.
Add %base-packages.
Remove desktops.
Remove xorg modules.
* etc/teams.scm (release): Add new splitted manifests.
* Makefile.am
(EXTRA_DIST): Remove release manifest; Add manifests release-minimal and
release-desktop.
(assert-binaries-available): Use new splitted release manifest.
* etc/manifests/release-desktop.scm (%system-packages):
Add desktops.
Add xorg modules.
* CODEOWNERS: Regenerate file.
Change-Id: I40de8b5d0f9c8b630e8af7969d4c195dd9e2c3e2
Signed-off-by: Efraim Flashner <efraim@flashner.co.il>
