The default timezone is set to Europe/Zaghreb, however the new check
introduced in 0a9eb3f3e2 was checking for the
one in the operating-system definition, which is Europe/Paris.
* gnu/tests/install.scm (gui-test-program): Explicitely set timezone to
Europe/Paris.
Change-Id: I7b5d327f13760632c9fbc0c1223a6a9bbc624f4d
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Merges: #4977
* gnu/installer/services.scm (%system-services): desktop-environment for sway
and its minimal companion packages.
* gnu/tests/install.scm (installation-target-desktop-os-for-gui-tests): Add
sway and its companion packages to operating-system packages.
Change-Id: I22f4cb67752ce1a15009680a1ba081fae129d45a
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Allow passing extra options to the 'cryptsetup open' command.
* gnu/system/mapped-devices.scm (luks-device-mapping-with-options):
[#:extra-options]: New argument.
(open-luks-device): Use it.
(check-luks-device): Validate it.
* doc/guix.texi (Mapped Devices): Document it.
* gnu/tests/install.scm (%test-encrypted-root-extra-options-os): New
test for it, as well as the previously untested #:allow-discards?
option.
(%encrypted-root-extra-options-os): New os declaration for the test.
Change-Id: I265a431efb0c81ed7cfc984344c6b8a4cc2f1624
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
This file contains two package definitions that should be on wm.scm.
They are not overly complex, not tightly couple and small, so there is
few to no reason keeping them in a dedicated file.
* gnu/packages/openbox.scm (obconf, openbox): Move from here ...
* gnu/packages/wm.scm: ... to here.
* gnu/packages/openbox.scm: Delete file.
* gnu/local.mk: Remove reference to openbox.scm.
* gnu/packages/kde-frameworks.scm: Fixup reference to (gnu packages openbox) module.
* gnu/packages/lxde.scm: Remove reference to (gnu packages openbox) module.
* gnu/packages/lxqt.scm: Fixup reference to (gnu packages openbox) module.
* gnu/tests/install.scm: Remove reference to (gnu packages openbox) module.
* po/packages/POTFILES.in: Remove reference to openbox.scm.
Change-Id: I0b887debb97e8fcc7880c9f05d29981226d06077
Signed-off-by: Sharlatan Hellseher <sharlatanus@gmail.com>
This reverts commit a7db92d9b3, this time with
the more careful command, to avoid a world rebuild:
grep -rl --exclude-dir=build --exclude-dir=patches --exclude=ld-wrapper.in \
--exclude=sitecustomize.py --exclude=guix-emacs.el maxim.cournoyer@gmail.com |
xargs sed -i 's/maxim.cournoyer@gmail.com/maxim@guixotic.coop/g'
Change-Id: I0871f5cf9ace79e34e78e24154d0da6ea95a3a91
The change was automated via:
git grep -l maxim.cournoyer@gmail.com |
xargs sed -i 's/maxim.cournoyer@gmail.com/maxim@guixotic.coop/g'
* .mailmap: New entry.
Change-Id: Iaa88b1e51c94159c49138fb43910badb990eb169
Fixes <https://issues.guix.gnu.org/70826>.
When using ‘luks-device-mapping-with-options’, procedures such as
‘operating-system-boot-mapped-devices’ would fail to identify LUKS
mapped devices because they would check whether the mapped device type
is ‘eq?’ to ‘luks-device-mapping’.
This addresses that by ensuring mapped devices are always of the
‘luks-device-mapping’ type, even when different options are used.
* gnu/system/mapped-devices.scm (close-luks-device): Add #:rest.
(luks-device-mapping-with-options): Deprecate.
* gnu/tests/install.scm (%encrypted-home-os-key-file): Update
accordingly.
* doc/guix.texi (Mapped Devices): Document use of the ‘arguments’ field
of ‘luks-device-mapping’. Remove ‘luks-device-mapping-with-options’
documentation.
(Bootloader Configuration): Update example with key file in extra
initrd.
Change-Id: I5442908cb8ef4e3891dbb053cccf5e42b895486f
Reported-by: Tadhg McDonald-Jensen <tadhgmister@gmail.com>
* gnu/installer/services.scm (%system-services): Include icewm as a desktop
environment.
* gnu/tests/install.scm (installation-target-desktop-os-for-gui-tests): Add
icewm to the list of packages.
* etc/manifests/release.scm: (%system-packages): Add icewm.
Change-Id: I881c1dd4289281e51c81d83fac785ef064e6ff6a
Signed-off-by: Christopher Baines <mail@cbaines.net>
This adds a "Kernel" page to the installer with the option to (cross-) install
the Hurd, if applicable (only available on x86 machines for now).
* gnu/installer/newt.scm (kernel-page): New procedure.
(newt-installer)[kernel-page]: New field.
* gnu/installer/kernel.scm,
gnu/installer/newt/kernel.scm: New files.
* gnu/local.mk (INSTALLER_MODULES): Add them.
* gnu/installer.scm (installer-steps): Use them to select kernel if
applicable.
* gnu/installer/newt/partition.scm (run-label-page): Default to "msdos" when
instaling the Hurd.
(run-fs-type-page): Add ext2 for the hurd.
(run-partitioning-page-partition): Remove `entire-encrypted' option when
installing the Hurd.
* gnu/installer/services.scm (system-services->configuration): Cater for the
Hurd with %base-services/hurd, and with %base-packages/hurd that must always
be set.
(%system-services): Change to procedure. When installing the the Hurd, do not
recommend `ntp-service-type' and USE `openssh-sans-x' package for
`openssh-service-type'.
(system-service-none): New variable.
* gnu/installer/newt/services.scm (run-network-management-page): Include it
when installing the Hurd.
(run-desktop-environments-cbt-page): When installing the Hurd, recommend to
not select any desktop enviroment. Update users.
* gnu/installer/parted.scm (efi-installation?): Return #f when installing for
the Hurd.
(create-ext2-file-system): New procedure.
(user-fs-type-name, user-fs-type->mount-type, partition-filesystem-user-type,
format-user-partitions): Support `ext2'.
(<user-partition> partition->user-partition): Use `ext2' when installing the
Hurd.
(auto-partition!): Likewise. No swap partition when installing the Hurd.
* gnu/installer/final.scm (install-system): Cater for cross installation of
the Hurd.
(bootloader-configuration): Use `grub-minimal-bootloader' when installing the
Hurd.
(user-partition-missing-modules): Cater for empty user-partitions.
(initrd-configuration, user-partitions->configuration): Cater for the Hurd.
* gnu/installer/steps.scm (format-configuration,
configuration->file): Cater for the Hurd.
* gnu/system/hurd.scm (%desktop-services/hurd): New variable.
* gnu/installer/tests.scm (choose-kernel): New procedure.
* gnu/tests/install.scm (gui-test-program): Use it.
Change-Id: Ifafb27b8a2f933944c77223a27ec151757237e36
* gnu/tests/install.scm (qemu-command*): Adjust qemu command when run on
armhf-linux or aarch64-linux to include a machine type.
(run-install): Same.
Change-Id: I32f85183cd8ec39c6a2e66624954743fd5983582
Fix build failure caused by lack of free disk space.
* gnu/tests/install.scm (%test-encrypted-root-not-boot-os): Increase the root
partition to 1600 MiB.
Change-Id: I9f8378c37743ae8e59a72228b9e8bdbad93b4473
The installation no longer fits into the 1.6G, leading to a warning while
running the test:
guix system: warning: at least 1526.8 MB needed but only 1408.4 MB available in /mnt
Followed by a failure:
93% [#################################################################### ]note: build failure may have been caused by lack of free disk space
builder for `/gnu/store/8wl8q8nc1za0vlyv21jpzwgml45njgk2-module-import-compiled.drv' failed with exit code 1
This commit increases the root partition to 2G, making the test pass again.
* gnu/tests/install.scm (%encrypted-root-installation-script): Increase the
root partition to 2G.
(%test-encrypted-home-os), (%test-encrypted-home-os-key-file): Increase the
target size to 3G to accommodate for the larger root partition.
Change-Id: I0f7092f7b7fc9992d3f895a1eaecf1f2065b7360
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
The installation no longer fits into the 1.6G, leading to a warning while
running the test:
guix system: warning: at least 1526.8 MB needed but only 1408.4 MB available in /mnt
Followed by a failure:
93% [#################################################################### ]note: build failure may have been caused by lack of free disk space
builder for `/gnu/store/8wl8q8nc1za0vlyv21jpzwgml45njgk2-module-import-compiled.drv' failed with exit code 1
This commit increases the root partition to 2G, making the test pass again.
* gnu/tests/install.scm (%encrypted-root-installation-script): Increase the
root partition to 2G.
Change-Id: I4cc5c78cfbd93ab2ae92ec77603ce6fee0289843
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
For testing that installation works, there is no need to spent 2000ms (the
default) iterating while generating the encryption key. This commit therefore
sets the iteration time to the lowest possible value, 1(ms).
* gnu/tests/install.scm (%encrypted-root-installation-script):
(%encrypted-home-installation-script):
(%encrypted-root-not-boot-installation-script): Pass -i 1 to luksFormat
invocation.
Change-Id: Iab79459b48bebe4d293b18290a236c6414fb27fc
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Based on encrypted-home-os, this test verifies unlocking via a key file.
* gnu/tests/install.scm (%encrypted-home-os-key-file),
(%encrypted-home-os-key-file-source): New variables.
(%test-encrypted-home-os-key-file): New exported variables.
(%encrypted-home-installation-script): Generate initrd with a key file for
unlocking the LUKS.
Change-Id: I04460155284bdef7e18da645f2b4b26bd8e86636
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/system/image.scm (mbr-disk-image, mbr-raw-image-type): New variables.
(qcow2-image-type): Inherit mbr-disk-image.
* guix/scripts/system.scm (%default-options): Use mbr-raw-image-type by
default.
* gnu/tests/install.scm (run-install): Use mbr-raw in the tests.
* doc/guix-cookbook.texi (Guix System Image API): Update the list of image
types.
* doc/guix.texi (Invoking guix system, System Images, image-type Reference):
Add mbr-raw and switch documented default to it.
This missing imports became apparent with commit
a09c7da8f8, which runs the marionette
service in a fresh Guile process with fewer imports.
* gnu/tests/databases.scm (run-postgresql-test, run-timescaledb-test)
(run-mysql-test): Add missing module imports for code passed to
'marionette-eval'.
* gnu/tests/docker.scm (run-docker-test, run-docker-system-test): Likewise.
* gnu/tests/mail.scm (run-dovecot-test, run-getmail-test): Likewise.
* gnu/tests/monitoring.scm (run-zabbix-server-test): Likewise.
* gnu/tests/pam.scm (run-test-pam-limits): Likewise.
* gnu/tests/reconfigure.scm (run-switch-to-system-test)
(run-install-bootloader-test): Likewise.
* gnu/tests/security-token.scm (run-pcscd-test): Likewise.
* gnu/tests/install.scm (gui-test-program): Likewise.
* gnu/tests/telephony.scm (run-jami-test): Add modules to
the #:imported-modules argument of 'marionette-operating-system'.
[test]: Remove them from 'with-imported-modules'; remove
'with-extensions'. Add "d-bus tooling loaded" test to set up %load-path
and %load-compiled-path so the marionette process can find
guile-ac-d-bus and guile-packrat.
The previous code worked "by chance": 'start' from (shepherd service)
happened to be in scope because the marionette REPL is created by a mere
'primitive-fork', and 'start' happened to kinda work.
* gnu/tests/base.scm (run-basic-test): Use 'start-service' from (gnu
services herd), not 'start' from (shepherd service), which is not
supposed to work.
* gnu/tests/install.scm (run-install): Likewise.
This reverts commit 0f66ef9aa9. e2fsprogs is
now included in the installation operating system since
34f69bc6e6ea555929ecca83ee7592f5261ff5f2, making this workaround obsolete.
Suggested-by: Ludovic Courtès <ludo@gnu.org>
This is a follow-up of: 45eac6cdf5.
It fixes the following error:
+ mkfs.ext4 -L my-root /dev/vda2
sh: line 12: mkfs.ext4: command not found
* gnu/tests/install.scm (%test-iso-image-installer): Add e2fsprogs to the
appended packages.
Fixes <https://issues.guix.gnu.org/53210>.
Reported by Mathieu Othacehe <othacehe@gnu.org>.
* gnu/system/install.scm (%installation-services): Set 'guix' to
use (current-guix) in 'guix-configuration'.
* gnu/system/examples/vm-image.tmpl: Likewise.
* gnu/tests/install.scm (operating-system-with-current-guix): Remove.
(run-install, installation-os-for-gui-tests): Remove its uses.
* Makefile.am (release): Remove intermediate use of
'update-guix-package.scm' and subsequent 'git commit' invocation.
* gnu/tests/install.scm (run-install)[packages]: Unconditionally add to OS.
[NUMBER-OF-DISKS]: Add argument, update doc and adjust. The returned gexp
output is now a list of images rather than the image itself.
* gnu/tests/install.scm (qemu-command*): Rename IMAGE argument to IMAGES, to
account for the above change. Adjust doc. Generate a QEMU '-drive' argument
for each disk image.
(%test-installed-os): Rename the IMAGE variable to IMAGES.
(%test-installed-extlinux-os): Likewise.
(%test-iso-image-installer): Likewise.
(%test-separate-home-os): Likewise.
(%test-separate-store-os): Likewise.
(%test-raid-root-os): Likewise.
(%test-encrypted-root-os): Likewise.
(%test-lvm-separate-home-os): Likewise.
(%test-encrypted-root-not-boot-os): Likewise.
(%test-btrfs-root-os): Likewise.
(%test-btrfs-raid-root-os): Likewise.
(%test-btrfs-root-on-subvolume-os): Likewise.
(%test-jfs-root-os): Likewise.
(%test-f2fs-root-os): Likewise.
(%test-xfs-root-os): Likewise.
(guided-installation-test): Likewise.
* gnu/tests/install.scm (qemu-command/writable-image): Replace the use of a
writable backing file by the use of the '-snapshot' option, and rename to...
(qemu-command*): ... this, adjusting all calls.
We had several bug reports with a root cause of "the clock was
incorrect" from users who used the installer to install a non-graphical
Guix System.
* gnu/installer/services.scm (%system-services): Add the ntp-service-type.
* gnu/installer/newt/services.scm (run-system-administration-cbt-page): New
variable.
(run-services-page): Use run-system-administration-cbt-page when not
installing a desktop.
* gnu/installer/tests.scm (choose-services): Add and use a
choose-misc-service? procedure.
* gnu/tests/install.scm (installation-target-os-for-gui-tests)<services>: Add
ntp-service-type.
This code duplicates the (gnu system image) and (gnu build image) code. Using
VM for image generation is not needed, not portable and really slow. Remove
all the VM image generation code to make sure that only the image API is used.
* gnu/build/vm.scm: Remove it. Move the qemu-command procedure to ...
* gnu/build/marionette.scm: ... here.
* gnu/local.mk (GNU_SYSTEM_MODULES): Adapt it.
* tests/modules.scm: Ditto.
* gnu/tests/install.scm: Ditto.
* gnu/system/vm.scm: Adapt it and remove expression->derivation-in-linux-vm,
qemu-img, system-qemu-image/shared-store and system-docker-image procedures.
* doc/guix.texi (G-Expressions): Adapt it.
Use a CEST timezone as this is the assumed timezone in the run-basic-test
procedure.
* gnu/tests/install.scm (%encrypted-root-not-boot-os,
%btrfs-root-on-subvolume-os): Use a CEST timezone.
Fixes a regression introduced in
0b5e128750, whereby 'qemu-img create ...'
as used here would fail with:
qemu-img: disk.img: Backing file specified without backing format
thereby breaking tests from (gnu tests install).
* gnu/tests/install.scm (qemu-command/writable-image): Pass "-F qcow2".
Fixes <https://issues.guix.gnu.org/40997>.
* gnu/bootloader.scm (<bootloader-configuration>): New 'targets' field.
(%bootloader-configuration-target): New procedure.
(bootloader-configuration-target): Add deprecation warning.
(bootloader-configuration-targets): New procedure.
* guix/scripts/system.scm (install): Access targets via
bootloader-configuration-targets.
(perform-action)[bootloader-target]: Remove unused argument and update doc.
Access targets via bootloader-configuration-targets and fix indentation.
(process-action): Access targets via bootloader-configuration-targets.
Do not provide the unused BOOTLOADER-TARGET argument when applying
`perform-action'.
* guix/scripts/system/reconfigure.scm (install-bootloader-program): Rename
DEVICE argument to DEVICES. Adjust doc and comment. Apply `installer' and
`disk-installer' for every DEVICES.
(install-bootloader): Access targets via bootloader-configuration-targets and
rename variable from DEVICE to DEVICES.
* gnu/tests/install.scm: Adjust accordingly.
* tests/guix-system.sh: Likewise.
* gnu/tests/reconfigure.scm (run-install-bootloader-test): Adjust the DEVICES
argument so that it is a list.
* doc/guix.texi: Update doc.
* gnu/installer/tests.scm (choose-services): Accept a new
choose-other-service? keyword argument, defaulting to false.
Expect an "Other services" checkbox-list. Update docstring.
* gnu/installer/tests.scm (conclude-installation): Rename it into ...
(start-installation): ... this new procedure.
(complete-installation): New procedure.
(choose-partitioning): Add an uefi-support? argument.
* gnu/tests/install.scm (uefi-firmware): New procedure.
(run-install, qemu-command/writable-image, gui-test-program,
installation-target-os-for-gui-tests): Add an uefi-support? argument.
(%extra-packages): Add grub-efi, fatfsck/static and dosfstools.
(%test-gui-installed-os): New variable.
* gnu/bootloader/grub.scm (grub-configuration-file): New parameter
store-crypto-devices.
[crypto-devices]: New helper function.
[builder]: Use crypto-devices.
* gnu/machine/ssh.scm (roll-back-managed-host): Use
boot-parameters-store-crypto-devices to provide its contents to the
bootloader configuration generation process.
* gnu/tests/install.scm (%encrypted-root-not-boot-os,
%encrypted-root-not-boot-os): New os declaration.
(%encrypted-root-not-boot-installation-script): New script, whose contents
were initially taken from %encrypted-root-installation-script.
(%test-encrypted-root-not-boot-os): New test.
* gnu/system.scm (define-module): Export
operating-system-bootoader-crypto-devices and
boot-parameters-store-crypto-devices.
(<boot-parameters>): Add field store-crypto-devices.
(read-boot-parameters): Parse store-crypto-devices field.
[uuid-sexp->uuid]: New helper function extracted from
device-sexp->device.
(operating-system-bootloader-crypto-devices): New function.
(operating-system-bootcfg): Use
operating-system-bootloader-crypto-devices to provide its contents to
the bootloader configuration generation process.
(operating-system-boot-parameters): Add store-crypto-devices to the
generated boot-parameters.
(operating-system-boot-parameters-file): Likewise to the file with
the serialized structure.
* guix/scripts/system.scm (reinstall-bootloader): Use
boot-parameters-store-crypto-devices to provide its contents to the
bootloader configuration generation process.
* tests/boot-parameters.scm (%default-store-crypto-devices): New
variable.
(%grub-boot-parameters, test-read-boot-parameters): Use
%default-store-crypto-devices.
(tests store-crypto-devices): New tests.
Note: This change requires an updated 'guix' package that contains
Linux-swap support in (gnu build file-systems).
* gnu/installer/parted.scm (user-partitions->configuration): Use UUIDs
in the 'swap-devices' field.
* gnu/installer/newt/final.scm (run-final-page)[wait-for-clients]: New
procedure. Use it.
* gnu/installer/tests.scm (choose-partitioning): Wait for
'starting-final-step' message and move configuration file dialog
handling to...
(conclude-installation): ... here. Send over PORT the reply
corresponding to 'starting-final-step'.
* gnu/tests/install.scm (gui-test-program): When ENCRYPTED? is false,
invoke 'swaplabel' in the marionette.
(installation-target-os-for-gui-tests): When ENCRYPTED? is false, except
a fixed UUID.
