Prefer parameterization of current-guix in release artifacts
generation.
* gnu/system/install.scm (%installation-service): Use (current-guix)
directly in guix service configuration.
Change-Id: Ifa363465e6a4f6936d0e51eaf1b33872519e2b0a
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Aarch64 doesn't support grub-pc, so we cannot
use the regular grub-bootloader, grub-efi-bootloader
has to be used.
Since neither packages nor bootloader are thunked,
there seems to be no other choice than using something
from the outside environment, such as an environment
variable to decide what bootloader to use.
For convenience, a procedure is made to be used from
other Guile code, instead of relying on environment
variables.
* gnu/system/install.scm
(make-installation-os): New variable; Use grub-efi-bootloader when
efi-only? is #t; Use bootloader package in packages instead of grub-pc.
(installation-os): Replace with call of make-installation-os with default
arguments.
Change-Id: I34ec8da6079617f39805b3e1168bad4a42d84cab
Signed-off-by: Rutherther <rutherther@ditigal.xyz>
Fixesguix/guix#422.
* gnu/system/install.scm (%installation-services)[guix-package-commit]:
New procedure.
<guix-configuration>: Use it instead of ‘channel-commit’.
Change-Id: I6ed5bc3f21a375e639fabfcbcdaf70b6347d1c5c
Fixes <https://issues.guix.gnu.org/67707>.
Previously ‘guix describe’ in the installation image would show the
URL of the local checkout that was used to build the image. It now
shows the default URL.
* gnu/system/install.scm (%installation-services): Change channel of
‘guix’ package to inherit from ‘%default-guix-channel’.
Change-Id: If848b5a6166904e982e0f9a0780f3e3f53bdfc28
This is a followup to d0510dcd82, which
wrongfully assumed that this was already the case.
* gnu/system/install.scm (%installation-services): Replace
‘syslog-service-type’ by ‘shepherd-system-log-service-type’.
Change-Id: I349454b8d005c67d2c6d6b5475f74d16c9006006
Because pt_PT and pt_BR have many differences, such as how
the word “file” gets translated, Guix’ pt_BR info manual is
called (guix.pt_BR) instead of (guix.pt).
* gnu/system/install.scm (log-to-info): Try region coded manual
file names.
(%installation-node-names): Add node names for pt_BR and zh_CN.
Change-Id: I89beebd323ee69ca83c22321c9d9e664b32cf6f3
Fixes <https://issues.guix.gnu.org/60010>.
Reported by pelzflorian (Florian Pelz) <pelzflorian@pelzflorian.de>.
Previously, the 'modprobe' executable would try and fail to load the
module from /lib/modules/*. Set 'LINUX_MODULE_DIRECTORY' to make sure
'modprobe' looks for the module in the right place.
* gnu/system/install.scm (uvesafb-shepherd-service)[modprobe]: New
variable.
In 'start' method, invoke it instead of KMOD/bin/modprobe.
Rationale: It is only used in INSTALLATION-OS and doesn't make sense to be
used in another context, given that file systems now automatically pull their
dependencies since commit 45eac6cdf5 (services:
Add file system utilities to profile).
* gnu/system.scm (%base-packages-disk-utilities): Deprecate and rename to...
* gnu/system/install.scm (%installer-disk-utilities): ... this.
(installation-os) [packages]: Adjust accordingly.
Rationale: It is only used in INSTALLATION-OS and doesn't make sense to be
used in another context, given that file systems now automatically pull their
dependencies since commit 45eac6cdf5 (services:
Add file system utilities to profile).
* gnu/system.scm (%base-packages-disk-utilities): Deprecate and rename to...
* gnu/system/install.scm (%installer-disk-utilities): ... this.
(installation-os) [packages]: Adjust accordingly.
* gnu/system/examples/vm-image.tmpl: Use the 'GUIX_DISPLAYED_VERSION'
environment variable in 'label'.
* gnu/system/install.scm (%installation-os): Likewise.
* Makefile.am (release): Set 'GUIX_DISPLAYED_VERSION'.
Fixes <https://issues.guix.gnu.org/53210>.
Reported by Mathieu Othacehe <othacehe@gnu.org>.
* gnu/system/install.scm (%installation-services): Set 'guix' to
use (current-guix) in 'guix-configuration'.
* gnu/system/examples/vm-image.tmpl: Likewise.
* gnu/tests/install.scm (operating-system-with-current-guix): Remove.
(run-install, installation-os-for-gui-tests): Remove its uses.
* Makefile.am (release): Remove intermediate use of
'update-guix-package.scm' and subsequent 'git commit' invocation.
Fixes <https://issues.guix.gnu.org/55806>.
* gnu/system/install.scm (%installation-services): Refactor into a
procedure, so that it can capture the system it's installing for.
Conditionally add uvesafb-service-type based on whether v86d is
supported by the target architecture.
(installation-os)[services]: Use the %installation-service procedure.
(uvesafb-shepherd-service): Remove %host-type checks.
Signed-off-by: Florian Pelz <pelzflorian@pelzflorian.de>
* gnu/services/base.scm (%loopback-static-networking): New variable.
(%base-services): Use it.
* gnu/system/hurd.scm (%base-services/hurd): Use it.
* gnu/system/install.scm (%installation-services): Use it.
* doc/guix.texi (Networking Setup): Document it.
* gnu/services/base.scm (<static-networking>)[interface, ip, netmask]
[gateway]: Remove.
[addresses, links, routes]: New fields.
[requirement]: Default to '(udev).
(<network-address>, <network-link>, <network-route>): New record types.
(ensure-no-separate-netmask, %ensure-no-separate-netmask): Remove.
(ipv6-address?, cidr->netmask, ip+netmask->cidr)
(network-set-up/hurd, network-tear-down/hurd)
(network-set-up/linux, network-tear-down/linux)
(static-networking->hurd-pfinet-options): New procedures.
(static-networking-shepherd-service): New procedure.
(static-networking-shepherd-services): Rewrite in terms of the above.
(static-networking-service): Deprecate. Adjust to new
'static-networking' API.
(%base-services): Likewise.
* gnu/system/install.scm (%installation-services): Likewise.
* gnu/system/hurd.scm (%base-services/hurd): Likewise, and separate
'loopback' from 'networking'.
* gnu/build/hurd-boot.scm (set-hurd-device-translators): Remove
"servers/socket/2".
* gnu/tests/networking.scm (run-openvswitch-test)["networking has
started on ovs0"]: Check for 'networking instead of 'networking-ovs0,
which is no longer provided.
* doc/guix.texi (Networking Setup): Document the new interface. Remove
documentation of 'static-networking-service'.
(Virtualization Services): Change Ganeti example to use the new
interface.
This is a followup to a7ac19851b.
* gnu/system/install.scm (installation-os)[setuid-programs]: Use
'setuid-program'.
* gnu/system/hurd.scm (%setuid-programs/hurd): Use 'file-like->setuid-program'.
Until now deduplication was performed as an additional pass after
copying files, which involve re-traversing all the files that had just
been copied.
* guix/store/deduplication.scm (copy-file/deduplicate): New procedure.
* tests/store-deduplication.scm ("copy-file/deduplicate"): New test.
* guix/build/store-copy.scm (populate-store): Add #:deduplicate?
parameter and honor it.
* tests/gexp.scm ("gexp->derivation, store copy"): Pass #:deduplicate? #f
to 'populate-store'.
* gnu/build/image.scm (initialize-root-partition): Pass #:deduplicate?
to 'populate-store'. Pass #:deduplicate? #f to 'register-closure'.
* gnu/build/vm.scm (root-partition-initializer): Likewise.
* gnu/build/install.scm (populate-single-profile-directory): Pass
#:deduplicate? #f to 'populate-store'.
* gnu/build/linux-initrd.scm (build-initrd): Likewise.
* guix/scripts/pack.scm (self-contained-tarball)[import-module?]: New
procedure.
[build]: Pass it as an argument to 'source-module-closure'.
* guix/scripts/pack.scm (squashfs-image)[build]: Wrap in
'with-extensions'.
* gnu/system/linux-initrd.scm (expression->initrd)[import-module?]: New
procedure.
[builder]: Pass it to 'source-module-closure'.
* gnu/system/install.scm (cow-store-service-type)[import-module?]: New
procedure. Pass it to 'source-module-closure'.
Move the cow-store procedure from the service declaration in (gnu system
install) to (gnu build install), so that it can be called from within a
different context than Shepherd.
* gnu/build/install.scm (mount-cow-store, unmount-cow-store): New procedures.
* gnu/system/install.scm (make-cow-store): Remove it,
(cow-store-service-type): adapt it accordingly.
Tools such as efibootmgr rely on the deprecated /sys/firmware/efi/vars API as
well as on the new /sys/firmware/efi/efivars API. The latter needs to be
mounted.
Reported by Keyhenge here:
https://lists.gnu.org/archive/html/bug-guix/2020-04/msg00274.html
Here is the efivarfs documentation:
https://www.kernel.org/doc/Documentation/filesystems/efivarfs.txt.
* gnu/system/file-systems.scm (%efivars-file-system): New exported variable,
(%base-file-systems): add it.
* gnu/system/install.scm (%efivars-file-system): Add it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
During the installation, it may be needed to build locales that are not
covered by glibc-utf8-locales. Make sure that the libraries required to build
locales are available.
This is a follow-up of 0eed771275.
* gnu/system/install.scm (installation-os)[services]: Add
%default-locale-libcs to gc-root-service-type.
Because the installer's uvesafb service loads uvesafb only on some machines.
This is a follow-up to commit 0ad60b2a89.
* gnu/system/install.scm (uvesafb-shepherd-service): Adjust provision and
description fields.
